Ghost Immobiliser Fitting
Protect your vehicle from theft of keys hacking, cloning and theft by using the first aftermarket CAN immobiliser. With the added option of connecting to an Ghost app and GPS tracking system that can notify you via phone if your car is tampered with or stolen.
The installation of a Ghost immobiliser can be done by a certified technician. The right tools, insulation tape, and heat shrink tubing is crucial.
Getting Started
Unlike physical theft protection devices like wheel locks or car alarms, ghost immobilisers safeguard your vehicle without the need of key fobs or LED indicators. They are directly connected to the ECU CAN data network, and are activated only after entering a PIN code. This gives a more secure level of security against key hacking, cloning, and even ECU swapping.
Installing a ghost immobiliser Birmingham requires a high degree of agility and precision. It can be a bit like tiptoeing through an icy minefield. One mistake can cause serious damage to the circuits of the electrical system of your vehicle. To avoid this, it's vital that you understand the installation process and prepare your vehicle accordingly.
The first step is to prepare the vehicle by taking out interior panels to allow for the immobiliser device. Once you've found the ideal location to hide it, secure it in place by using cable ties to stop it from being taken away or tampered with. Clean your wiring by tying loose wires down and using insulation tape to cover the exposed connections. This reduces the risk of a short circuit that is not intended to happen and improve the appearance and reducing the chance of theft.
Find a source of constant 12V power and an earthing point for the ghost immobiliser. Once you've located them check the power cables with a multimeter. Finally, connect the CAN H and CAN L wires from the immobiliser to your chosen power source and the grounding point.
Once you've made all of the connections required, it's important to double-check the connections and examine the immobiliser for indications of corrosion or damage. You should also test the system to ensure it's working correctly by entering a PIN number and starting the engine. This should be part of your routine, as it will allow you to identify any issues that may arise early. Regular testing will help prolong the life of your device, and keep it performing at its best.
Preparing ghost immobiliser car
Installing a Ghost immobiliser requires skills and knowledge. A wiring diagram of the vehicle is crucial for locating the correct wires and making precise connections. A multimeter can help verify electrical values and ensure security. Cable tie and insulation tape can be used to secure the connections and protect them from alteration. Additionally, a user's manual will give you specific instructions specifically tailored to your Ghost Immobiliser model.
Once installed, the ghost immobiliser will stop engine starts that are not authorized by requiring the owner to enter a unique code sequence using the buttons on the console or steering wheel. This can be done manually or remotely using an app for mobile phones, and the code is able to be changed by the vehicle owner at anytime. The device also functions quietly and is undetectable to thieves because it doesn't emit radio frequencies.
A ghost immobiliser is connected directly to the vehicle's CAN bus, which is a network that connects to all of the electronic control units (ECUs). It intercepts signals generated by the ECUs and stops the engine from running if the ECU detects a false signal. The system is tamper-proof as well as weatherproof, and does not include key fobs or LED indicators to attract the attention of thieves.
It can be positioned behind or in a less noticeable location so that it's not obvious to thieves and does not interfere with vehicle performance. It can be mounted in a small jar, so that it is less likely to be observed by untrustworthy salespeople during a test drive.
Its discrete operation and integration with the vehicle's CAN bus system makes it a formidable deterrent to modern methods of theft, like key cloning and signal relay attacks. Combining the system with other security measures will create a powerful barrier that will deter even the most persistent of thieves. This is why more and more insurance companies are suggesting or even requiring ghost immobilisers to be installed, since it can significantly reduce the cost of insurance.
Making Connections
In contrast to traditional security systems that are heard by thieves, ghost immobilisers work silently to stop them from knowing that your vehicle has been switched on. They also stop high tech methods of stealing vehicles, such as OBD hacking. They can also be put in without causing permanent damage to your vehicle, making them an excellent choice for people who plan to sell their vehicle in the near future.
The Autowatch Ghost 2 CANbus immobiliser is one of the latest and most reliable methods for preventing car theft. It makes use of the CAN data network to shut down your engine and generates a pin code that only you know, so it's hard for thieves to detect. It can be fitted in various vehicles and integrates with a number of features already in place, such as car alarms GPS trackers, car alarms, steering wheel locks, and door bypass systems for locks.
If you choose to use a Ghost immobiliser for your vehicle, make sure to consult the wiring schematic to identify the wires to connect. Make sure to double-check the location of these wires to ensure that they are in the correct location and mark them with tape or labels to make it easier to keep on track of them. You'll also need to locate a source of continuous power (12V) and a grounding point for the system. Once you have these in place, you can begin to make the connections needed to complete the installation.
ghost immobiliser 2 will not allow your vehicle to start until you enter a pin code through the buttons of the steering wheel or dashboard. This will stop ECU hacking or key cloning and other techniques of vehicle theft. In addition, it could be combined with other Thatcham-approved security devices, like alarms and tyre clamps to give your car an additional degree of security.
As the UK automotive industry grows, and so do the options for securing your car. With so many avenues for thieves to break in and take your car it's essential to take every precaution to prevent it from being taken away. Ghost immobilisers have become a popular choice among car owners who are accountable.
Testing the System
The Ghost Immobiliser uses a CAN data network to communicate with the vehicle's ECU and prevent the engine from starting until a specific PIN code is entered. This makes it difficult for thieves copy the key fob that you use to start your vehicle, and even more difficult to disable the system through hacking its electronic.
Ghost Immobilisers are also able to be used together with GPS tracking devices that will aid in tracking your vehicle and track it if it's stolen. This feature is not commonly available in aftermarket security products, but it is an excellent way to improve your vehicle's security, and provide you with peace of peace of.
The Ghost-II immobiliser is not just a source of greater security, but also provides a more convenient experience for the user by eliminating the need to use additional key fobs or devices. It comes with an easy and intuitive PIN code entry system that is seamlessly integrated into your daily routine. It also offers deactivation modes and convenience features that allow you to temporarily disable the immobiliser for valet parking and servicing.
Prepare the necessary tools and become familiar with the wiring of your vehicle. A basic set of tools will allow you to create precise connections. A multimeter can be used to check electrical values. Insulation tape and heat shrink tubing are crucial for securing connections from short circuits while cable tie can be used to secure the wiring in the right place. Additionally, it is essential to work in a well-lit area and wear safety gear when working with electrical and tool components.
After you've completed the installation, you must test the Ghost immobiliser to verify that it's working properly. The first step is to start the vehicle without entering the PIN code. If this doesn't work, you'll need to test the system again and perform a more thorough inspection of the connections.
Contrary to other security devices that are available, the Ghost Immobiliser is a covert device that cannot be detected by thieves and is more effective than conventional physical deterrents like wheel clamps or steering locks. It is TASSA-approved and recognized by a few insurance companies. This makes it a cost-effective investment that will give you the peace of mind you deserve.